Maintenance Utility Operating Manual 42678819FU02 - 28/38
2.4.1.1.2.3. Factory/Shipping mode setting function
(1) Displaying the function screen
Click the [Next] button on “PU board setting – PU board setting start” or on the previous function screen
to display the "PU board setting – Mode Factory/Shipping" screen.
(a) Current mode display area
(b) Shipping mode [Execute] button
(c) Factory mode [Execute] button
(d) [Next] button (if there is a following function screen) or [Finish] button (if there is no following function
screen)
(e) [Skip the setup and move on to the next screen.] checkbox
The current mode display area shows the current mode obtained from the printer.
(d)
(e)
(a)
(b)
(c)
To Next Page
Loading...
