e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
REMOTE SERVICE
7 - 4
7.1.3 Setting procedure
(1) Start up the self-diagnosis setting mode 08-9783, and then change the setting value to “0”.
(2) Turn the power OFF, and then ON.
(3) Press the [USER FUNCTIONS] button to enter the user function screen.
(4) Press the [ADMIN] button.
Fig.7-1
When the Administrator Password has been set, ADMINISTRATOR PASSWORD screen is
displayed.
Fig. 7-2
To Next Page
Loading...
