Toshiba e-STUDIO477SL - Download Abnormality; Front Alignment HP Abnormality

e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
5 - 34
[CC03] Download abnormality
[CC80] Front alignment HP abnormality
* If [EAF6] occurs two times consecutively, it becomes a [CC80] error.
Check item Measures
Stapler • Connector check (P9-1)
• Harness check
Stapler motor • Motor check (M9)
• Connector check (P9-1)
• Harness check
Finisher control PC board • Board check
• Connector check (J9, J10)
• Harness check
Parts to be replaced Remark
Stapler home position sensor
Stapler motor
Finisher control PC board
Classification Error content
Finisher related service call Download abnormality
Check item Measures
Setting Update the firmware again.
Classification Error content
Finisher related service call Front alignment HP abnormality
Check item Measures
Front alignment plate home
position sensor
• Sensor check (S4)
• Connector check (P8-3)
• Harness check
Front alignment motor • Motor check (M4)
• Connector check (P6-12)
• Harness check
Finisher control PC board • Board check
• Connector check (J6, J8)
• Harness check
Parts to be replaced Remark
Front alignment plate home
position sensor
Front alignment motor
Finisher control PC board