2
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
DISASSEMBLY AND REPLACEMENT
2 - 1
2. DISASSEMBLY AND REPLACEMENT
2.1 Removal and Installation of Options
Important:
Before installing or removing options, turn the main power switch off and disconnect the power
cable from the outlet.
2.1.1 MJ-1038 (Inner finisher)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Open the scanner.
Fig. 2-1
(5) Remove 2 screws and take off the stacker
tray.
Fig. 2-2
To Next Page
Loading...
