Toshiba e-STUDIO477SL - Check of the File System (Check F;S); Explanation for each Item; Functions; Recovery of the File System (Recovery F;S)

e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
3 - 24
3.11.3 Functions
[A] Check of the File System (Check F/S)
In case that particular service calls occur or there is a possibility of damage to the file system, the status
of each partition in the HDD can be checked.
Fig. 3-15
Explanation for each item
• 1: Checks all partitions.
• 2: Checks root partition only.
• 3-8: Checks each partition shown above.
Notes:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
• If damage is discovered, recover or initialize the file system (HDD).
[B] Recovery of the File System (Recovery F/S)
In case that an error occurs during the file system check, each partition can be recovered.
Fig. 3-16
Explanation for each item
• 1: Recovers all partitions.
• 2: Recovers root partition only.
• 3-8: Recovers each partition shown above.
Notes:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
• If an error occurs during recovery, initialize the file system (HDD).
File System(F/S) Recovery Mode -> Check F/S
Please Select Partition 0: Main menu
1. ALL
2. /
3. /work
4. /registration
5. /backup
6. /imagedata
7. /storage
8. /encryption
File System(F/S) Recovery Mode -> Recovery F/S
Please Select Partition 0: Main menu
1. ALL
2. /
3. /work
4. /registration
5. /backup
6. /imagedata
7. /storage
8. /encryption