Maintenance Utility Operating Manual 42678819FU02 - 27/38
(2) Specifying the PU serial number to be set
When the PU serial number to be set is entered in the input area to the right of "PU Serial Number:", the
[Execute] button is enabled.
(3) Setting the PU serial number
After entering the PU serial number to be set, click [Execute] to set the PU serial number.
(4) PU serial number setting result
When the PU serial number is set correctly, the download completion window appears. Click [OK] to
close the download completion window.
(5) Going to the following function screen or finishing PU board setting
The [Next] button or the [Finish] button is inactive when the function screen is displayed and becomes
active by the following operation.
(a) Setting the PU serial number
(b) If it is unnecessary to set a PU serial number, check the [Skip the setup and move on to the next
screen.] checkbox.
The screen changes to the following function screen or the "PU board setting - Finish Settings" screen
by clicking the [Next] button or the [Finish] button.
PU Serial Number :
0AE44003128
To Next Page
Loading...
