Toshiba e-STUDIO477SL - Firmware Update Mode

e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 16
During the update, "Update in progress" is displayed on the right of each item. After it is completed,
"Completed" is displayed there. Example screens of the system firmware update are as follows, and
these are the same for other firmware.
As for a patch update, "Patch Update Successful Restart the MFP" is displayed instead of "Complete"
when the update is completed.
Fig.8-11
Firmware Update Mode
System Firmware Version : xxxx(x.x.x.x)
Update Mode : USB Update
Updata Status
1. SYSTEM FIRMWARE (OS Data)
2. ENGINE FIRMWARE
* PU LOADER FIRMWARE
* PU FIRMWARE
* OPTION TRAY FIRMWARE
* LCF FIRMWARE
* FINISHER FIRMWARE
* DUPLEX FIRMWARE
3. SCANNER FIRMWARE
* SU LOADER FIRMWARE
* SU RECOVERY FIRMWARE
* SU FIRMWARE
4. SYSTEM SOFTWARE (HD Data)
* FILE SYSTEM SOFTWARE
* APPLICATION SOFTWARE
Update in progress
*
OS Update Status
Updating FROM ... (xx%)
Firmware Update Mode
System Firmware Version : xxxx(x.x.x.x)
Update Mode : USB Update
Updata Status
1. SYSTEM FIRMWARE (OS Data)
2. ENGINE FIRMWARE
* PU LOADER FIRMWARE
* PU FIRMWARE
* OPTION TRAY FIRMWARE
* LCF FIRMWARE
* FINISHER FIRMWARE
* DUPLEX FIRMWARE
3. SCANNER FIRMWARE
* SU LOADER FIRMWARE
* SU RECOVERY FIRMWARE
* SU FIRMWARE
4. SYSTEM SOFTWARE (HD Data)
* FILE SYSTEM SOFTWARE
* APPLICATION SOFTWARE
Completed
*
Update successfully completed
Restart the MFP