e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
REMOTE SERVICE
7 - 14
Set the date and time of the Total Counter.
The following 3 items can be specified for the date setting, and more than one day of the week
also can be selected.
• Day of the week (More than one day can be selected.)
• Notify Date 1
• Notify Date 2
• Day of the week ([SUN] to [SAT] buttons)
Pressing the buttons ([Sunday] to [Saturday]) of the desired day makes transmission on every
specified day. More than one day can be selected.
* This does not affect the settings of “Notify Date 1” and “Notify Date 2”.
• Notify Date 1 and Notify Date 2 ([DATE] button)
Pressing the [DATE] button sets up to 2 dates on which you wand to send data.
* This is not affected by the specified day of the week.
Fig. 7-16
Key in the date (acceptable values: 0-31) in “Notify Date 1” or “Notify Date 2” and press the [OK]
button.
To Next Page
Loading...
