Toshiba e-STUDIO477SL - Page 361

e-STUDIO477S/527S
05/08
Mode
Element
Sub Element
Item
Subitem
Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM
Contents
Proc
edure
ServiceUI
08
Primary DNS Server
Address Registration
Registration of Primary DNS Server Address.
Maximum 40 characters (byte).
Setting
mode
System
Network
IPv6
3781
12
-
08
Secondary DNS Server
Address Registration
Registration of Secondary DNS Server Address.
Maximum 40 characters (byte).
Setting
mode
System
Network
IPv6
3782
12
-
08
LLTD function setting
Sets the LLTD function.
1: Enabled
2: Disabled
Setting
mode
System
Network
3793
1
1~2
12
NIC
08
PJL USTATUS setting
Sets whether to remain or initialize the PJL
USTATUS setting for each job.
0: Remaining
1: Initialized
* This setting is available only when SNMP
communication is performed.
Setting
mode
System
General
3797
1
0~1
1
SYS
08
461-800 mm
Sets the number of multiples. A sheet is counted
as N sheets when extra long size paper is used for
printing.
Setting
mode
Counter
Extra long size
paper count
Count switching
setting
3800
0
2
1~30
4
Yes
SYS
08
801-1320 mm
Sets the number of multiples. A sheet is counted
as N sheets when extra long size paper is used for
printing.
Setting
mode
Counter
Extra long size
paper count
Count switching
setting
3800
1
3
1~30
4
Yes
SYS
08
Paper size
1: legal 2: letter 6: A4 7: A5 10: B5 11: Folio 12:
Legal13" 13: LetterSquare
<Default value>
NAD: 2
Others: 6
Setting
mode
System
General
USB media
direct printing
3802
Refer to
contents
1,2,6,7,10~
13
1
SYS
08
Enable/disable setting
Sets the USB media direct printing function.
0: Disabled 1: Enabled
Setting
mode
System
General
USB media
direct printing
3803
1
0~1
1
SYS
08
Department Management
setting by Remote Scan
Sets the department management with remote
scanning as follows:
0: w/o GUI OFF, w/ GUI OFF
1: w/o GUI ON, w/ GUI OFF
2: w/o GUI OFF, w/ GUI ON
3: w/o GUI ON, w/ GUI ON
w/o GUI:
Remote scanning is operated on SSOP application
of eCOPY Inc.
w/ GUI:
Remote scanning is operated on TTEC-specific
GUI.
This setting is only for department management
with remote scanning. When GUI is set ON, a
department code dialog is displayed at the start-up
of remote scanning. This code is valid only when
the code 08-9120 is set "1 (Valid)".
Setting
mode
System
Scanning
3805
3
0~3
1
SYS
08
Mixed transmission
When "2" is selected in 08-3810 (Internet and
Intranet Faxes are mixed), the address entered in
this code is used as the one for the Intranet Fax
sender.
Maximum 192 characters
* Once the HDD clearance has been performed,
the default value is set.
Setting
mode
System
Network
Intranet Fax
Sender e-mail
address
3809
Refer to
contents
12
-
8
Ver03
08 Setting Mode