Maintenance Utility Operating Manual 42678819FU02 - 19/38
When the PU board setting value is successfully uploaded and saved, the message shown below appears.
Click the [Make Text] button on the "PU board replacement - Upload and Save" screen to display a
window for file storage. (In the file name input area, the default file name is displayed.)
In the case of changing a name of a folder for file storage or a name of a file to be saved from the
window for file storage, enter the file name and click the [Execute] button. Then a dump list of PU
board setting values that are uploaded to the specified folder under the specified file name is created in
text format.
After data uploading, Click the [Finish] button on the "PU board replacement - Upload and Save" screen
to disconnect the printer connected and return to "PU board replacement - Menu" screen.
PU board value has been uploaded and saved correctly.
Click the [Make Text] button to generate in Text format to dump list of
all uploaded PU board settings.
If you click [Finish], the printer is disconnected, and you will return to
the "PU board replacement - Menu".
After the upload process finishes, replace the old board by a new one..
To Next Page
Loading...
