145
Chapter 17
Manage Your Mesh Device
4 ) Click Start to begin the diagnostics, and you will find the test results in the gray
box.
17. 4. Update the Firmware
TP-Link is dedicated to improving product features, giving you a better network
experience.
We will inform you through the web management page if there’s any update firmware
available for your mesh device. The latest firmware can also be downloaded from the
Support page of our website www.tp-link.com for free.
Note:
1. Make sure that you have a stable connection between the mesh device and your computer. It is NOT recommended
to upgrade the firmware wirelessly.
2. Back up your mesh device configuration before upgrading the firmware.
3. DO NOT turn off the mesh device during the firmware upgrade.
¾ Follow the steps below to upgrade the firmware online:
1. Click Check for Upgrades.
2. If a new firmware is displayed, click Upgrade and click Yes when prompted, then the
mesh device will automatically download the latest firmware file and upgrade.
¾ Follow the steps below to manually update the firmware:
1. Download the latest firmware file for the mesh device from our website www.tp-link.
com.
2. Visit http://tplinkwifi.net and log in with the password you set for the mesh device.
3. Go to Setting > System Tools > Firmware Upgrade (AP Mode) or Advanced > System
Tools > Firmware Upgrade (Router Mode).
4. Focus on the Device Information section. Make sure the downloaded firmware file
matches with the Hardware Version.
5. Focus on the Local Upgrade section. Click Browse to locate the downloaded new
firmware file, and click Upgrade.
To Next Page
Loading...
