56
Chapter 6
Customize Your Network Settings
3. Scroll down to the Address Reservation section, and click Add to add an address
reservation entry for your device.
4. Enter the MAC Address of the device for which you want to reserve IP address.
5. Specify the IP address which will be reserved by the mesh device.
6. Select the Enable This Entry check box and click OK to make the settings effective.
6. 2. Configure IPv6 LAN Settings (Router Mode)
Based on the IPv6 protocol, the mesh device provides two ways to assign IPv6 LAN
addresses:
• Configure the RADVD (Mesh Device Advertisement Daemon) address type
• Configure the DHCPv6 Server address type
6. 2. 1. Configure the RADVD Address Type
1. Visit http://tplinkwifi.net and log in with the password you set for the mesh device.
2. Go to Advanced > Network > LAN Settings.
3. Select IPv6 to configure IPv6 LAN parameters.
To Next Page
Loading...
