147
Chapter 17
Manage Your Mesh Device
1 ) Locate the Factory Default Restore section, and click Factory Restore to reset
the mesh device.
2 ) Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the mesh device.
2. We strongly recommend you back up the current configuration settings before resetting the mesh device.
17. 6. Reboot the Mesh Device
The Reboot feature cleans the cache to enhance the running performance of the mesh
device. You can reboot the mesh device manually or set it to reboot regularly.
1. Visit http://tplinkwifi.net and log in with the password you set for the mesh device.
2. Go to Setting > System Tools > Reboot Schedule (AP Mode) or Advanced > System
Tools > Reboot Schedule (Router Mode), and you can restart your mesh device.
¾ To reboot the mesh device manually:
Click Reboot, and wait a few minutes for the mesh device to rebooting.
¾ To schedule the mesh device to reboot at a specific time:
1 ) Enable Auto Reboot.
2 ) Specify the Time when the mesh device reboots.
To Next Page
Loading...
