69
Chapter 6
Customize Your Network Settings
¾ To create multi-SSID network:
The mesh device supports additional up to three multi-SSID wireless networks for
client access in each wireless band. You can specify the access and security settings
to ensure network security and privacy according to your situation.
1. Visit http://tplinkwifi.net and log in with the password you set for your mesh device.
2. Go to Setting > Wireless > Multi-SSID (AP Mode) or Advanced > Wireless > Advanced
Settings (Router Mode).
1 ) Locate the Multi-SSID section, and enable 2.4/5GHz or 6GHz to open the
corresponding setup page.
2 ) Select the Enable MSSID 1 or 2 check box(es) to enable the corresponding
multi-SSID network.
To Next Page
Loading...
