Port Status of Instance 0 :
Figure 8-3: Port Status of Instance 0
Parameter descriptions:
Port No: The port number to which the configuration applies.
Status: The forwarding status. Same definition as of the RSTP specification. Possible values are
“FORWARDING”, “LEARNING”, “DISCARDING”.
Role: The role that a port plays in the spanning tree topology. Possible values are “disable”(disable
port) , ”alternate”(alternate port) , “backup”(backup port) , “ROOT”(root port) , “DSGN”(designated
port) , “MSTR”(master port). The last 3 are possible port roles for a port to transit to FORWARDING
state
Path Cost: Display currently resolved port path cost value for each port in a particular spanning tree
instance.
Priority: Display port priority value for each port in a particular spanning tree instance.
Hello: Per port Hello Time display. It takes the following form: Current Hello Time/Hello Time Setting
Oper. Edge: Whether or not a port is actually an Edge Port.
Oper. P2P: Whether or not a port is actually a Point-to-Point port.
Restricted Role: Same as mentioned in “Port Config”.
Restricted Tcn: Same as mentioned in “Port Config”.
Buttons
Back : Click to undo any changes made locally and return to the Users.
Refresh : Click to refresh the page.
Messages
Message: MSTP disabled or force version is not MSTP.
Recovery: Click OK to clear, change the Instance Status parameter, and continue.
To Next Page
Loading...