network. The allowed range is 1 to 255; default RV value is 2.
QI(sec): Query Interval. The Query Interval is the interval between General Queries sent by the Querier.
The allowed range is 1 to 31744 seconds; default query interval is 125 seconds.
QRI(0.1 sec): Query Response Interval. The Max Response Time used to calculate the Max Resp Code
inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds;
default query response interval is 100 in tenths of seconds (10 seconds).
LLQI (0.1 sec): Last Member Query Interval. The Last Member Query Time is the time value
represented by the Last Member Query Interval, multiplied by the Last Member Query Count.
The allowed range is 0 to 31744 in tenths of seconds; the default last member query interval is 10 in
tenths of seconds (1 second).
URI(sec): Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of
a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default
unsolicited report interval is 1 second.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...