Rule: Click the icon to display the IPMC Profile Rule Settings (In Precedence Order):
IPMC Profile Rule parameters:
Profile Name: e.g., IPMC-Profile-Cfg-Fisrt_IPMC_ProCfg.
Entry Name: Select an existing entry name at the dropdown.
Address Range: The allowed range of IP addresses.
Action: Select Deny or Permit. The default is Deny.
Log: Select Enable or Disable logging. The default is Disable.
Buttons
Add Last Rule: Click to add the last rule to the profile.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...