tacacs: Use remote TACACS+ server(s) for authentication. Terminal Access Controller Access Control
System Plus. It is a networking protocol which provides access control for routers, network access
servers and other networked computing devices via one or more centralized servers. TACACS+
provides separate authentication, authorization and accounting services.
Methods that involve remote servers are timed out if the remote servers are offline. In this case, the
next method is tried. Each method is tried from left to right and continues until a method either
approves or rejects a user. If a remote server is used for ‘primary’ authentication, it is recommended to
configure secondary authentication as 'local'. This lets the management client login via the local user
database if none of the configured authentication servers are alive.
Service Port: Enter a service port number for telnet, ssh, http, and https clients as required.
HTTPS Redirect: Check the box to force the web UI to go through https (secure HTTPS).
Cmd Lvl: Authorize all commands with a privilege level higher than or equal to this level. Valid values
are 0 - 15.
Cfg Cmd: Check to also authorize configuration commands.
Fallback: Check the box to Enable the fallback mechanism.
Exec: Check the box to Enable exec (login) accounting.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...