12-3.2 Static Table
Navigate to Security > IP Source Guard > Static Table to create new Static IP Source Guard entries.
Static IP Source Guard Table parameters:
Add New Entry: Click the button to add a row for configuring.
Port: At the dropdown select the port to be configured.
IP Address: Enter the IP address for this new entry.
MAC Address: Enter the MAC address for this new entry (must be a valid unicast MAC address).
Apply: Click the Apply button when done.
12-3.3 Dynamic Table
The Security > IP Source Guard > Dynamic Ta bl e displays data on existing entries.
Dynamic IP Source Guard Table parameters:
Port: Displays the configured port.
IP Address: Displays the IP address for the entry.
MAC Address: Displays the MAC address for the entry.
Previous: Click the button to display the previous set of entries.
Next: Click the button to display the next set of entries.
To Next Page
Loading...