RMON Statistics Status
Navigate to Switch > Security > RMON > Statistics > Status to display the RMON Statistics Status page:
Parameters:
ID: Indicates the index of Statistics entry.
Data Source (ifIndex): The data source which you want to be monitored.
Drop: The total number of events in which packets were dropped by the probe due to lack of
resources.
Octets: The total number of octets of data (including those in bad packets) received on the network.
Pkts: The total number of packets (including bad packets, broadcast packets, and multicast packets)
received.
Broad-cast: The total number of good packets received that were directed to the broadcast address.
Multi-cast: The total number of good packets received that were directed to a multicast address.
CRC Errors: The total number of packets received that had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518 octets.
Under-size: The total number of packets received that were less than 64 octets.
Over-size: The total number of packets received that were longer than 1518 octets.
Frag.: The number of frames with a size is less than 64 octets received with invalid CRC.
Jabb.: The number of frames which size is larger than 64 octets received with invalid CRC.
Coll.: The best estimate of the total number of collisions on this Ethernet segment.
64 Bytes: The total number of packets (including bad packets) received that were 64 octets in length.
65~127: The total number of packets (including bad packets) received that were 65 to 127 octets in
length.
128~255: The total number of packets (including bad packets) received that were 128 to 255 octets
long.
256~511: The total number of packets (including bad packets) received that were 256 to 511 octets
long.
512~1023: The total number of packets (including bad packets) received that were 512 to 1023 octets
long.
1024~1588: The total number of packets (including bad packets) received that were 1024 to 1588
octets long.
To Next Page
Loading...