RMON History Status
Navigate to Switch > Security > RMON > History > Status to display the RMON History Configuration
page:
Parameters:
Sample Index: Indicates the index of the data entry associated with the control entry
Sample Start: The total number of events in which packets were dropped by the probe due to lack of
resources.
Drops: The total number of events in which packets were dropped by the probe due to lack of
resources.
Octets: The total number of octets of data (including those in bad packets) received on the network.
Pkts: The total number of packets (including bad packets, broadcast packets, and multicast packets)
received.
Broadcast: The total number of good packets received that were directed to the broadcast address.
Multicast: The total number of good packets received that were directed to a multicast address.
CRC Errors: The total number of packets received that had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518 octets.
Undersize: The total number of packets received that were less than 64 octets.
Oversize: The total number of packets received that were longer than 1518 octets.
Frag.: The number of frames which size is less than 64 octets received with invalid CRC.
Jabb.: The number of frames which size is larger than 64 octets received with invalid CRC.
Coll.: The best estimate of the total number of collisions on this Ethernet segment.
Utilization: The best estimate of the mean physical layer network utilization on this interface during
this sampling interval, in hundredths of a percent (.01% sampling interval).
To Next Page
Loading...