RMON Alarm Status
Navigate to Switch > Security > RMON > Alarm > Status to display the RMON Alarm Status page:
Parameters:
ID: Indicates the index of Alarm control entry.
Interval: Indicates the interval in seconds for sampling and comparing the rising and falling threshold.
Variable: Indicates the particular variable to be sampled.
Sample Type: The method of sampling the selected variable and calculating the value to be compared
against the thresholds, possible sample types are:
Delta: Delta sampling subtracts the current sample value from the last sample taken and then
compares the difference to the threshold. Delta sampling is like a counter that records a value that is
constantly increasing. The difference between samples of the selected variable is used when
comparing against the thresholds.
Absolute: Absolute sampling compares the sample value directly to the threshold. Absolute
sampling is like a gauge that records values that go up or down. An actual value of the selected
variable is used when comparing against the thresholds.
Value: The value of the statistic during the last sampling period. (e.g., 72).
Startup Alarm: The alarm that may be sent when this entry is first set to valid (e.g., RisingOrFalling).
Rising Threshold: Rising threshold value.
Rising Index: Rising event index.
Falling Threshold: Falling threshold value.
Falling Index: Falling event index.
To Next Page
Loading...