Mode: Select mirror mode:
Rx only: Frames received on this port are mirrored on the mirror port. Frames transmitted are not
mirrored.
Tx only: Frames transmitted on this port are mirrored on the mirror port. Frames received are not
mirrored.
Disabled: neither frames transmitted nor frames received are mirrored.
Enabled: Frames received and frames transmitted are mirrored on the mirror port.
: For a given port, a frame is only transmitted once. So it is not possible to mirror
Tx frames on the mirror port. Because of this, the mode for the selected mirror port is
limited to Disabled or Rx only.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...