Web Interface
To download configuration in the web interface:
1. Click Maintenance, Configuration, and Backup.
2. Select running-config, default-config, or startup-config for backup.
3. Click the Backup button. At the prompt select “Save”. Select Open or Save or View
Download.
Figure 14-1.2: Backup Configuration
Parameter descriptions:
running-config: A virtual file that represents the currently active configuration on the switch. This
file is volatile. The config settings must be different than the default settings.
default-config: A read-only file with vendor-specific configuration. This file is read when the system
is restored to default settings.
startup-config: The startup configuration for the switch, read at boot time.
Buttons
Backup : Click the “Backup” button then the switch will start to download the configuration from flash
memory to the PC or Server. Note: running-config may take a while to prepare for download.
Note: At firmware v1.01.1201, the Backup config file name will automatically include the device's IP
address and date.
To Next Page
Loading...