Transition Networks SM8TAT2SA - Page 21

Daylight Saving Time Configuration
Daylight Saving Time: This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select 'Disable' to disable the
Daylight Saving Time configuration. Select 'Recurring' and configure the Daylight Saving Time duration
to repeat the configuration every year. Select 'Non-Recurring' and configure the Daylight Saving Time
duration for single time configuration. (Default: Disabled).
Recurring Configuration
Start time settings:
Month - Select the starting month (Jan – Dec).
Week - Select the starting week number (1-5).
Day - Select the starting day (Mon – Sun).
Hours - Select the starting hour (0-23).
End time settings:
Month - Select the starting month (Jan – Dec).
Week - Select the starting week number (1-5).
Day - Select the starting day (Mon – Sun).
Hours - Select the starting hour (0-23).
Offset settings: Offset - Enter the number of minutes to add during Daylight Saving Time. The valid
range is 1 to 1440 minutes. The default is 60 minutes.
N
OTE
: The information under “Start Time Settings” and “End Time Settings” displays
what you set on the “Start Time Settings” and “End Time Settings” field information.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.