Message: Firmware upgrade in progress Waiting, please stand by...
Meaning:
While the firmware is being updated, do not restart or power off the switch or it may fail to
function afterwards.
Recovery: None. Wait for the upgrade to complete.
Message: Error : The firmware image is invalid. Please use a correct firmware image.
Meaning: You tried to upload an invalid firmware file.
Recovery: Check the file format and location. Make sure the firmware filename prefix matches your
specific switch model (e.g., sm16tat2sa).
Message: Firmware upgrade in progress
The uploaded firmware image is being transferred to flash.
The system will restart after the update.
Until then, do not reset or power off the device!
Waiting, please stand by…
To Next Page
Loading...