15-3 Management
Navigate to DMS > Management > Device List to show all devices and their information which are
detected by DMS.
DMS > Management > Device List parameters
Remove: Check the box to delete the table entry at the next Apply.
Status: e.g., Online or Offline.
Device Type: e.g., SWITCH or Others.
Model Name: e.g., SM8TAT2SA or SM16TAT2SA or SM24TAT2SA.
Device Name: e.g., SM8TAT2SA or SM16TAT2SA or SM24TAT2SA.
MAC: e.g., 00-40-C7-1C-CB-6E.
IP Address: e.g., 192.168.1.77.
Buttons
Auto-refresh: Select on to automatically refresh the page every 3 seconds. The default is off.
Refresh: Click the button to refresh the page immediately.
Edit: Click the button to display the table in editable form. Click this icon to Edit Device Name and http
Port. You can press "Edit" icon to edit device name for each IP device. This function can also be
configured in the Dashboard of Topology view. There is no HTTP connection function for Unknown
Device and PC type devices, so UI doesn't provide "Edit HTTP port" function for configuring it.
Show xx entries: At the dropdown select how many entries to show per page (10, 25, 60, or All).
Search: Enter key word(s) to search for on the page.
Remove: Only Offline devices provide "Remove" function to remove from DMS device list.
Previous: Click to display the previous set of entries (if any exist).
Next: Click to display the next set of entries (if any exist).
Apply: Click to save changes.
To Next Page
Loading...