Rx Frames: The number of LLDP frames received on the port.
Rx Errors: The number of received LLDP frames containing some kind of error.
Frames Discarded: If an LLDP frame is received on a port, and the switch's internal table has run full,
the LLDP frame is counted and discarded. This situation is known as "Too Many Neighbors" in the LLDP
standard. LLDP frames require a new entry in the table when the Chassis ID or Remote Port ID is not
already contained within the table. Entries are removed from the table when a given port's link is down,
an LLDP shutdown frame is received, or when the entry ages out.
TLVs Discarded: Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV is
short for "Type Length Value"). If a TLV is malformed, it is counted and discarded.
TLVs Unrecognized: The number of well-formed TLVs, but with an unknown type value.
Org. Discarded: The number of organizationally received TLVs.
Age-Outs: Each LLDP frame contains information about how long time the LLDP information is valid
(age-out time). If no new LLDP frame is received within the age out time, the LLDP information is
removed, and the Age-Out counter is incremented.
Buttons
Auto-refresh: Check to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page.
Clear: Clears the counters for the selected port.
To Next Page
Loading...