LACP Timeout: The Timeout controls the period between BPDU transmissions.
Fast: It will transmit LACP packets each second,
Slow: It will wait for 30 seconds before sending a LACP packet.
Aggtr: Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its own
aggregator ID is the same as its own Port No. We can regard an aggregator as a representative of a
trunking group. Ports with same Group ID and using same trunking method will have the opportunity
to aggregate to a particular aggregator port. This aggregator port is usually the port with the smallest
Port No. within the trunking group.
Status: This field represents the trunking status of a port which uses a trunking method other than
“None”. It also represents the management link status of a port which uses the “None” trunking
method. “---“ means “not ready”
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...