Buttons
Lacp Detail: Click this button to display the aggregator information, as described below.
Figure 4-5.2: The LACP Detail page
Parameter descriptions:
Actor
System Priority: Show the System Priority part of the aggregation Actor. (1-65535).
Mac Address: The system ID of the aggregation Actor.
Actor Port: The actor's port number connected to this port.
Actor Key: The Key that the actor has assigned to this aggregation ID.
Partner
System Priority: Show the System Priority part of the aggregation partner. (1-65535)
Mac Address: The system ID of the aggregation partner.
Partner Port: The partner's port number connected to this port.
Partner Key: The Key that the partner has assigned to this aggregation ID.
Trunk Status: This field represents the trunking status of a port which uses a trunking method other
than “None”. It also represents the management link status of a port which uses the “None” trunking
method. “---“ means “not ready”
Button
Back: Click to undo any changes made locally and return to the Users.
Messages: Method must be LACP and Member Ports must have a port at least.
To Next Page
Loading...