Transition Networks SM8TAT2SA - Page 7

Models
This manual documents three similar models as described below. The models differ mainly in port
count. Model differences are noted where applicable throughout this manual.
SM8TAT2SA
PoE+ layer 2 Smart Managed Switch with Web GUI, SNMP management;
PoE scheduling, APR, and DMS feature support. Port support description:
(8) 10/100/1000Base-T PoE+ ports with 2 SFP ports
SM16TAT2SA
PoE+ layer 2 Smart Managed Switch with Web GUI, SNMP management;
PoE scheduling, APR, and DMS feature support. Port support description:
(16) 10/100/1000Base-T PoE+ ports with 2 SFP ports
SM24TAT2SA
PoE+ layer 2 Smart Managed Switch with Web GUI, SNMP management;
PoE scheduling, APR, and DMS feature support. Port support description:
(24) 10/100/1000Base-T PoE+ ports with 2 SFP ports
Purpose
This manual gives specific information on how to operate and use the SMxTAT2SA management
functions with an HTTP/HTTPs web browser.
Audience
This manual is intended for use by network administrators who are responsible for operating and
maintaining network equipment; it assumes a basic working knowledge of general switch functions,
the Internet Protocol (IP), and Hypertext Transfer Protocol (HTTP).
Note: See the Install Guide for important Cautions and Warnings.
Related Manuals
For Transition Networks Drivers, Firmware, Manuals, etc. go to the Product Support
webpage (logon
required). For Application Notes, Brochures, Data Sheets, Specifications, etc. go to the Support
Library (no logon required). Note that this manual provides links to third party web sites for which
Transition Networks is not responsible. This manual describes how to install, configure, and
troubleshoot the SMxTAT2SA switch. Other related manuals are listed below.
• SMxTAT2SA Quick Start Guide, 33715
• SMxTAT2SA Install Guide, 33716
• SMxTATS2A CLI Reference, 33718