6-4 VLAN Selective QinQ
Navigate to Switch > VLAN Management > VLAN Selective QinQ to create new and edit existing
entries.
Parameter descriptions:
Delete: To delete a private VLAN entry, check this box. The entry will be deleted during the next apply.
CVID (Customer VLAN ID): the inner VLAN tag id of the IEEE 802.1ad frame. Enter a value 1 - 4095.
SPID (Service Provider VLAN ID): Enter a value 1 - 4095.
Port Members: Check the box for each port that is to be a member.
Buttons
Add New Entry: Click the button to add a new instance. An empty row is added to the table, and the
new member can be configured as needed.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...