Index
146 Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide
Bluetooth wireless technology 78, 88
bottom panel 13, 84
bracket
insert 18
receiver 18
RPA 17
breakout box, on event marker/1PPS cable 68
buttons 10, 28, 82, 90
C
cables
coaxial 69
data/power 44, 67, 121
event marker/1PPS 67
GPS antenna 13, 73
RPA 13
camcorder batteries 23
catch
for battery compartment 11
for CompactFlash/USB door 10, 82
cellphones 24, 87
cellular modems 24, 87, 144
centimeter-level accuracy 6, 78
charging
internal batteries 33
minimum time required 33
Trimble R7 GPS receiver and TSCe controller
batteries 35
CMR
input 6, 78
output 6, 78
output, default settings 60
coaxial cable, for connecting to GPS antenna 69
COCOM limits 7, 79
cold start, time required 57, 113
color-coded TNC ports 13
CompactFlash card
formatting 28, 32
full 31
logging data to 30
transferring files from 46
Type I 25
upgrading receiver firmware from 36, 95
CompactFlash port 13, 84
CompactFlash/USB door 13, 84
CompactFlash/USB door catch 10, 82
configuring
event marker input in real time 72
MS Series parameters 128
receiver in real time 38, 98
receiver using application files 98
connecting to computer for data transfer 44
current application file 39, 59, 99, 115
current receiver configuration 99
current settings 115
Current.cfg See current application file
D
DAT files 45, 46
data
logging internally 30
logging to Trimble Survey Controller 31, 92
transferring from the receiver 43
Data button 10, 28
data files
deleting by formatting CompactFlash card 32
transferring 45
transferring from CompactFlash card 46
Trimble R7 GPS receiver 46, 47
Data LED See Logging/Memory LED
data link, using a cellular modem 24, 87
data outputs, NMEA 128
data storage cards See CompactFlash cards
data transfer
transferring files 43–47
with serial connection 44
with USB connection 45
Data Transfer utility
deleting files on receiver with 47
transferring files with 45
data/power cable pinouts 67, 121
default application file 39, 59, 99, 115
default settings
1PPS time tags 60
antenna 60, 116
ASCII output 60, 116
ASCII time tags 60
baud rate 60, 116
binary output 60, 116
changing 100
CMR output 60
elevation mask 60, 116
factory 61
logging rate 60
measurement rate 60
motion 60, 116
NMEA output 60, 116
overriding 99
Port 3 power output 60