Troxler 3440-L - Page 59

Model 3440-L 5–7
5. 3440 OPERATIONS
Input the gauge moisture via the keypad and press 〈START/ENTER〉.
SELECT:
1- True M x.x %
2-Gauge M x.x %
ENTER to enable
Press 〈START/ENTER〉.
K=x.xx
Do you want to
save this value
or later use?
 To enable the K value and store it in memory for later use, press
〈YES〉:
Enter desired
Memory location
of M-Offset:
(1-4)
Enter the appropriate value (1-4) and press 〈START/ENTER〉:
Moisture Offset
SAVED
K=x.xx
location x
Moisture Offset
ENABLED
K=x.xx
 To enable the K value, but not store it in memory, press 〈NO/CE〉. The
value will be enabled, but will not be saved
after it is disabled or the
gauge is turned off.
Moisture Offset
ENABLED
K=x.xx
The offset will be enabled, but will not be saved
after it is disabled or
the gauge is turned off. The display will then return to READY.