Why does the safety relief valve on my Tuttnauer Laboratory Equipment open at a pressure higher than specified?
If the safety relief valve on your Tuttnauer Laboratory Equipment opens at a pressure higher (more than 10%) than specified, the relief valve is likely faulty and needs replacement.
What does 'Supply water error (digital input option)' mean on my Tuttnauer 5050 and how can I fix it?
If your Tuttnauer Laboratory Equipment displays a 'Supply water error (digital input option)' message, it indicates a malfunction in the city (tap) water supply. To resolve this, check and fix the city (tap) water supply.
What does 'Heat Time Error' mean on my Tuttnauer Steriliser, and how do I fix it?
If the Tuttnauer Steriliser displays 'Heat Time Error', it means the system couldn't reach the required temperature in the chamber within the preset time. Make sure that the autoclave is not overloaded.
What does 'Air Error' mean on my Tuttnauer Steriliser, and how can I fix it?
If the Tuttnauer Steriliser displays 'Air Error', it means the autoclave didn't reach atmospheric pressure 10 minutes after the drying stage started. Wait until the autoclave reaches atmospheric pressure and then perform a new cycle.
What to do if Tuttnauer 5050 Laboratory Equipment shows high pressure I (ending or N exhaust) I M?
If your Tuttnauer Laboratory Equipment shows a high pressure I (ending or N exhaust) I M error, follow these steps: * Start by performing a new cycle. * Calibrate the system. * Check and fix any loose connections. * If the problem persists, replace the faulty I.O. board, valve or solid state relay.
What does 'Canceled By User' mean on my Tuttnauer 5050 Laboratory Equipment and how do I proceed?
If your Tuttnauer Laboratory Equipment displays a 'Canceled By User' message, it means the START/STOP key was pressed and the cycle was aborted. Wait until "cycle failed – canceled by user" or "cycle end – canceled by user" is displayed, then perform a new cycle.
What to do if my Tuttnauer 5050 says 'Door is open (During the cycle)'?
If your Tuttnauer Laboratory Equipment displays a 'Door is open (During the cycle)' message, it means the door is open during the cycle. Close the door to perform a new cycle.
What does 'Time Error' mean on my Tuttnauer Laboratory Equipment and how do I resolve it?
If your Tuttnauer Laboratory Equipment displays a 'Time Error' message, it means the real-time clock is faulty and the main board needs to be replaced.
How to fix 'RTC Error - Please Set Current Date and Time' on my Tuttnauer 5050?
If your Tuttnauer Laboratory Equipment displays an 'RTC Error - Please Set Current Date and Time' message, it means you need to set the date and time. Set the current date and time. If the problem persists, the main board may need replacement.
What does 'Compressed air supply error (C - cooling) only' mean on my Tuttnauer 5050 and how do I fix it?
If your Tuttnauer Laboratory Equipment displays a 'Compressed air supply error (C - cooling) only' message, it indicates a malfunction in the compressed air supply. This can be due to the compressed air valve not opening because of a faulty connection or a faulty I.O. board, or the compressed air valve itself might be faulty. Check and fix the compressed air supply. If the problem persists, fix the connection, replace the faulty I.O. board, or replace the faulty valve.
Overview of the laboratory sterilizer, its models, and features.
Procedures for unpacking and inspecting the autoclave upon receipt.
Details of the product warranty, coverage, and exclusions.
Information on warranty registration and technical service contact.
Lists relevant directives and standards the autoclave complies with.
Details water quality requirements and system utilities.
Covers electrical configurations, operating conditions, and performance.
Includes construction materials, emissions, and dimensions.
Provides detailed model specifications and sticker descriptions.
Diagrams showing the front and rear views of the autoclave.
Diagram of the control panel and its numbered components.
Explains the functions of the UP, DOWN, and START/STOP keys.
Lists and explains operational and error messages and symbols.
Describes the optional printer and its role in the system.
Details the Glass sterilization program parameters and sequence.
Details the Plastic sterilization program parameters and sequence.
Details the Liquid A sterilization program, cautions, and sequence.
Details the Liquid B – Waste sterilization program, cautions, and sequence.
Details the Liquid A – Cooling program parameters and sequence.
Details the Liquid B – Waste Cooling program parameters and sequence.
Details the Bio Hazard 1 program for bio-hazard models.
Details the Bio Hazard 2 program for bio-hazard models.
Details the Bio Hazard Liquids program for bio-hazard models.
Details the Vacuum Test program for PV models.
Details the Warm-Up program for pre-warming the chamber.
Details the Isothermal program for liquids, agar, pasteurization.
Details the Air Mixture program for liquids in soft packages.
Details the Glass Test program for checking bottle durability.
Details the Durham program for liquids.
Illustrates screens shown after a successful sterilization cycle.
Shows screens for cycles aborted after sterilization.
Illustrates screens indicating a general cycle failure.
Instructions for browsing menus and changing parameters.
Accessing quick options, setting date/time, and system parameters.
Details on managing cycle parameters like Dry Time.
Information on printer output content and paper handling.
Guidelines for treating thermal papers and powering off the printer.
Guidelines for preparing instruments, tubing, and liquids.
Instructions for filling the autoclave's water reservoir.
Steps for turning on the autoclave and opening/closing doors.
How to start, run, and unload the autoclave cycle.
Instructions for setting a future start time for the sterilization cycle.
Covers daily, weekly, periodic maintenance and tests.
Instructions for draining the reservoir and cleaning the strainer.
Guidance on checking safety valves and moving the autoclave.
Addresses issues with display, printer, sensors, and range errors.
Covers system, cycle, pressure, and time-related errors.
Addresses errors related to jacket temp, maintenance, water, vacuum, and cycle counts.
General| Brand | Tuttnauer |
|---|---|
| Model | 5050 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page