Why is the safety relief valve on my Tuttnauer 5050 Laboratory Equipment constantly leaking?
If the safety relief valve on your Tuttnauer Laboratory Equipment leaks constantly, the valve is likely faulty and needs replacement. Additionally, check the water quality.
What to do if cycle is 'Canceled By User' on Tuttnauer Laboratory Equipment?
If your Tuttnauer Laboratory Equipment displays 'cycle failed – canceled by user' or 'cycle end – canceled by user', wait until the message is displayed. Then, perform a new cycle.
What to do if the printer does not print on Tuttnauer 5050?
If the Tuttnauer Laboratory Equipment printer does not print, first ensure that the paper is inserted in the printer. Then, switch off the machine and switch it back on while pressing the feed button on the printer. If the printer prints a test printout, the printer is O.K. and there is a problem with the electronics. Contact your dealer to solve the problem. If the printer does not print the test printout, there is a problem with the printer. Contact your dealer to solve the problem.
What to do if my Tuttnauer 5050 says 'Door is open (During the cycle)'?
If your Tuttnauer Laboratory Equipment displays a 'Door is open (During the cycle)' message, it means the door is open during the cycle. Close the door to perform a new cycle.
What does 'Time Error' mean on my Tuttnauer Laboratory Equipment and how do I resolve it?
If your Tuttnauer Laboratory Equipment displays a 'Time Error' message, it means the real-time clock is faulty and the main board needs to be replaced.
How to fix 'RTC Error - Please Set Current Date and Time' on my Tuttnauer 5050?
If your Tuttnauer Laboratory Equipment displays an 'RTC Error - Please Set Current Date and Time' message, it means you need to set the date and time. Set the current date and time. If the problem persists, the main board may need replacement.
What does 'Compressed air supply error (C - cooling) only' mean on my Tuttnauer 5050 and how do I fix it?
If your Tuttnauer Laboratory Equipment displays a 'Compressed air supply error (C - cooling) only' message, it indicates a malfunction in the compressed air supply. This can be due to the compressed air valve not opening because of a faulty connection or a faulty I.O. board, or the compressed air valve itself might be faulty. Check and fix the compressed air supply. If the problem persists, fix the connection, replace the faulty I.O. board, or replace the faulty valve.
What does 'High Pressure (Dry)' mean on Tuttnauer Laboratory Equipment and how do I resolve it?
If your Tuttnauer Laboratory Equipment displays 'High Pressure (Dry)', it means the pressure in the chamber exceeds atmospheric pressure by more than 10kPa at the beginning of the dry stage. To resolve this, perform a new cycle.
Why does the safety relief valve on my Tuttnauer Laboratory Equipment open at a pressure higher than specified?
If the safety relief valve on your Tuttnauer Laboratory Equipment opens at a pressure higher (more than 10%) than specified, the relief valve is likely faulty and needs replacement.
Why is my Tuttnauer Steriliser leaking at the door?
If the Tuttnauer Steriliser is leaking at the door, it could be due to a dirty or damaged door gasket. Clean the door gasket. Also, clean the surface against the door. If the issue persists, call for service.
Overview of the laboratory sterilizer, its models, and features.
Procedures for unpacking and inspecting the autoclave upon receipt.
Details of the product warranty, coverage, and exclusions.
Information on warranty registration and technical service contact.
Lists relevant directives and standards the autoclave complies with.
Details water quality requirements and system utilities.
Covers electrical configurations, operating conditions, and performance.
Includes construction materials, emissions, and dimensions.
Provides detailed model specifications and sticker descriptions.
Diagrams showing the front and rear views of the autoclave.
Diagram of the control panel and its numbered components.
Explains the functions of the UP, DOWN, and START/STOP keys.
Lists and explains operational and error messages and symbols.
Describes the optional printer and its role in the system.
Details the Glass sterilization program parameters and sequence.
Details the Plastic sterilization program parameters and sequence.
Details the Liquid A sterilization program, cautions, and sequence.
Details the Liquid B – Waste sterilization program, cautions, and sequence.
Details the Liquid A – Cooling program parameters and sequence.
Details the Liquid B – Waste Cooling program parameters and sequence.
Details the Bio Hazard 1 program for bio-hazard models.
Details the Bio Hazard 2 program for bio-hazard models.
Details the Bio Hazard Liquids program for bio-hazard models.
Details the Vacuum Test program for PV models.
Details the Warm-Up program for pre-warming the chamber.
Details the Isothermal program for liquids, agar, pasteurization.
Details the Air Mixture program for liquids in soft packages.
Details the Glass Test program for checking bottle durability.
Details the Durham program for liquids.
Illustrates screens shown after a successful sterilization cycle.
Shows screens for cycles aborted after sterilization.
Illustrates screens indicating a general cycle failure.
Instructions for browsing menus and changing parameters.
Accessing quick options, setting date/time, and system parameters.
Details on managing cycle parameters like Dry Time.
Information on printer output content and paper handling.
Guidelines for treating thermal papers and powering off the printer.
Guidelines for preparing instruments, tubing, and liquids.
Instructions for filling the autoclave's water reservoir.
Steps for turning on the autoclave and opening/closing doors.
How to start, run, and unload the autoclave cycle.
Instructions for setting a future start time for the sterilization cycle.
Covers daily, weekly, periodic maintenance and tests.
Instructions for draining the reservoir and cleaning the strainer.
Guidance on checking safety valves and moving the autoclave.
Addresses issues with display, printer, sensors, and range errors.
Covers system, cycle, pressure, and time-related errors.
Addresses errors related to jacket temp, maintenance, water, vacuum, and cycle counts.
General| Brand | Tuttnauer |
|---|---|
| Model | 5050 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page