Unipulse F372A - Page 107

106
1 EXP. HOLD FUNCTIONS
106
EXP. HOLD FUNCTIONS
Chapter
1
8. A: Sample hold B: Peak hold
An arbitrary point is held when the SECTION signal is ON.
The maximum value in the section specified is held.
The value is maintained until the T/H signal turns ON.
9. A: Sample hold B: Valley hold
An arbitrary point is held when the SECTION signal is ON.
The minimum value in the section specified is held.
The value is maintained until the T/H signal turns ON.
Sensor Input Value Hold Value B
Hold Value
A
SECTION
----(A)
H/E
OFF
HOLD䋨B䋩
Blink ON OFF
ON
OFF
OFF
Blink
OFF ON
HOLD䋨A䋩
Blink
Status Display
Status Display
Status Display
Status Display
PEAK䋨B䋩
T/H
Hold Value
A
Sensor Input
Value
Hold Value B
H/E
SECTION
T/H
HOLD䋨A䋩
Blink ON Blink
Status Display
----(A)
OFF
HOLD䋨B䋩
OFF ON OFF
Status Display
Status Display
VLLY䋨B䋩
OFF Blink ON
Status Display
OFF