Unipulse F372A - Page 108

107
1 EXP. HOLD FUNCTIONS
107
EXP. HOLD FUNCTIONS
Chapter
1
10. A: Sample hold B: P-P hold
An arbitrary point is held when the SECTION signal is ON.
The difference between the maximum value and minimum value in the section specified is
held.
The value is maintained until the T/H signal turns ON.
11. A: Sample hold B: Average hold
An arbitrary point is held when the SECTION signal is ON.
The averageof the section specified is held.
The value is maintained until the T/H signal turns ON.
Sensor Input Value
Hold Value
A
Hold Value B
H/E
T/H
SECTION
ON Blink
----(A)
OFF
HOLD䋨A䋩
Blink
OFF
P-P䋨B䋩
OFF Blink ON OFF
Status Display
HOLD䋨B䋩
OFF ON
Status Display
Status Display
Status Display
Hold Value
A
Hold Value B
Sensor Input Value
H/E
Blink ON Blink
OFF
SECTION
T/H
ON
Status Display
OFF
OFF ON OFF
----(A)
AVE䋨B䋩
OFF Blink
Status Display
Status Display
Status Display
HOLD䋨A䋩
HOLD䋨B䋩