UPC Horizon - Advanced Settings; Video Settings; Audio Output; Horizon Box

THE HORIZON MAIN MENU
56
ADVANCED SETTINGS
Enables you to set and adjust the general functions of the Horizon box and to set video
and audio formats and other personal settings.
VIDEO SETTINGS
The options available in VIDEO SETTINGS enable you to select the type of video con-
nection and to set the display format and resolution:
VIDEO CONNECTION
Enables you to select either the HDMI or SCART connection or allows the Horizon box
to select the required video connection automatically.
HDMI RESOLUTION
Enables you to switch between TV resolutions.
CHANGE FORMAT
Enables you to select the type of screen display to use when a programme is broad-
cast in 4:3 format. The following display types are available: PILLARBOX, FULL SCREEN
(ZOOM) and FULL SCREEN (STRETCH).
TV COLOUR MODEL
Enables you to select the appropriate TV colour model. The AUTOMATIC option is set as
standard. The options available are AUTOMATIC, RGB, YCbCr-4:2:2 and YCbCr-4:4:4.
If any problems should occur with the picture display (e.g. picture loss or incorrect
colours).
AUDIO OUTPUT
The options available in AUDIO OUTPUT enable you to activate and deactivate the dierent
audio outputs and change audio delays for both HDMI and SCART. The audio delay setting
helps you to optimise the time delay between the video and the audio signal, if required.
SCART
Activates or deactivates the SCART audio output.
HDMI
Activates or deactivates the HDMI audio output.
HDMI AUDIO DELAY
Sets the HDMI audio delay. The delay can be changed in increments of 50 ms between
limits of 0 ms and +200 ms.
S/PDIF
Activates or deactivates the S/PDIF audio output.
S/PDIF AUDIO DELAY
Sets the S/PDIF audio delay. The delay can be changed in increments of 50 ms between
limits of 0 ms and +200 ms.
DOLBY DIGITAL
Activates or deactivates the DOLBY (AC3) audio output.
HORIZON BOX
Enables you to set and adjust the general features of the
Horizon box.
DEFAULT SETTINGS
Enables you to reset the Horizon box to the default settings with the possibility of keeping or
deleting the recordings stored on the Horizon box disk.
DISPLAY BRIGHTNESS
This option enables you to set the brightness of the Horizon box display. The available setting
levels are 25%, 50%, 75% and 100%, where 100% is the maximum brightness.
DELETE HARD DISK (WARNING)
When this command is activated, the hard disk is reformatted and all recordings are
deleted.
B ACK