UPC Horizon - Conflicts During Programming or Instant Recording

MISCELLANEOUS
66
Conflicts during programming or instant recording
When you are programming a recording or you manually start a record-
ing and the disk is full, the system will also display a conict warning
message.
Depending on the disk management settings you have set in
TOOLBOX - RECORDINGS AND REMINDERS, the Horizon box will dis-
play the following options:
– If the disk space management settings are set NEVER DELETE
RECORDINGS, the notication screen is displayed. You must go to
the LIBRARY and select recordings to delete to free up disk space.
– If the disk space management settings are set to AUTO DELETE
RECORDINGS or WARN ME ABOUT CONFLICTS, the Horizon box
checks if there are any lowest priority recordings. If there are, then
the disk quota conict is ignored and the recording is programmed.
Low priority recording disk space will be used for the programmed
item.
– If there are no low priority recordings, the notication screen is dis-
played. You must go to the LIBRARY and select recordings to delete
to free up disk space.
This screen will disappear after a timeout
of 120 seconds. If the timeout expires, the
programmed item will be ignored.
B ACK