UPC Horizon - Menu Language; Set Transparency; Info Bar Display; Subtitle Language

THE HORIZON MAIN MENU
60
SKIP FORWARD
This enables you to determine the fast-forward interval when controlling
your media playback.
The options are “10 SEC.”, “30 SEC.”, “1 MIN.”, “5 MIN.” and “10 MIN.”
SKIP BACK
This enables you to determine the rewind interval when controlling your
media playback.
The options are “10 SEC.”, “30 SEC.”, “1 MIN.”, “5 MIN.” and “10 MIN.”
MENU LANGUAGE
Enables you to change the menu language. The options are the same as
those shown when the Horizon box was switched on for the rst time.
You can set the menu language to German, French, Italian and English.
SET TRANSPARENCY
Enables you to set the transparency of the menus that appear over full
screen TV. The options available are:
CLEAR: The most transparent
STANDARD: About 50% transparent
DARK: The most opaque
INFO BAR DISPLAY
Enables you to set the length of time the info bar is displayed. The options
are “5 sec”, “10 sec” or “15 sec”.
SUBTITLE LANGUAGE
Enables you to set the subtitles language if this option is available for
programmes or lms.
SUBTITLES FOR THE HARD OF HEARING
Enables you to display additional descriptive subtitles for customers with
hearing problems, if available. This service in not available on all channels.
SELECT AUDIO LANGUAGE
Enables you to set the audio language, if available. Press OK to display the
list of languages available. Scroll to the desired language and press OK.
STANDBY POWER USAGE
Enables you to set the power level used when the Horizon box is in standby
mode The options are HIGH, MEDIUM and ECO MODE (NO TEL/INTERNET).
AUTOSTANDBY MODE
Enables you to dene when the Horizon box automatically switches to
standby mode.
AUTOMATIC
The Horizon box switches to standby mode at the time set by you or after
a set period of time.
OFF
AUTO-STANDBY MODE not in use.
AT NIGHT
The Horizon box switches to standby mode at the default time of 11 p.m.
AT NIGHT standby mode nishes at a default time of 5 a.m. These times
can be set using AUTO-STANDBY FROM-TO.
AUTOSTANDBY FROMTO
Enables you to set the start and end time of AUTO-STANDBY.
Please note that in LOW standby mode, the telephone and Internet
connection are inactive.
B ACK