UPC Horizon - Rejecting Calls from Withheld Numbers

INTERNET & FIXED NETWORK
72
Toggling
Rejecting a waiting call
Accept waiting call and terminate existing call
Accept waiting call and place existing call on hold
Call waiting
If your line is engaged, a third party can still call you and let you know
that they are waiting. You will be informed by means of an audible tone.
You now have the option of terminating the present call or placing it on
hold temporarily while you accept the waiting call. You can of course
ignore the waiting call if you wish.
ACTIVATION
Call the following service number:
*
43
#
Wait for the conrmation and then end
the call.
Press or
R
wait for the dialling tone and press
0
.
Press or
R
wait for the dialling tone and press
1
.
Press or
R
wait for the dialling tone and press
2
.
Press or
R
and
2
to switch between the connections / calls.
DEACTIVATION
Call the following service number:
#
43
#
Wait for the conrmation and then end
the call.
You can also end the current connection by hanging up. In this
case, a call indicates that you have a call waiting. While you hear
the ringing tone, you can accept the waiting call by lifting the
receiver.
Please note that call forwarding if engaged does not work if the
“Call waiting” function is active.
Please note that as long as the “Call waiting” function is active,
forwarding if engaged will not work. When you end one of the
two connections (hang up the receiver), a tone indicates that the
other connection is still active. While you hear the ringing tone,
you can answer the other connection by lifting the receiver.
Rejecting calls from withheld numbers
ACTIVATION
Call the following service number:
*
77
#
Wait for the conrmation and then end
the call.
DEACTIVATION
Call the following service number:
#
77
#
Wait for the conrmation and then end
the call.
B ACK