Utax CD 1020 User Manual

2AV/X
1-7-4
1-7
7. Insert the power plug and turn the main switch on. LED2 (green) on the flash tool assembly flashes and upgrading of the
master ROM starts.
8. When flashing LED2 (green) remains lit after approximately 30 to 40 seconds, upgrading of the master ROM is
complete.
9. Turn the main switch on.
10. Remove the memory tool PCB.
Important:
“C021” may be indicated on the operation panel while upgrading the firmware. However, it does not interfere with the
upgrading operation.

Utax CD 1020 Specifications

General

Brand	Utax
Model	CD 1020
Category	Copier
Language	English