1-4-5
2AV/X
Description
Maintenance
item No.
1-4
U000 Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items, and paper jam and service call occurrences.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the maintenance items
to reenter the settings after initialization or replacement.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be output using the cursor up/down keys. The selected item is displayed in reverse.
Display
MAINTENANCE
JAM
SERVICE CALL
Output list
List of the current settings of the maintenance modes
List of the paper jam occurrences
List of the service call occurrences
3. Press the start key. The interrupt copy mode is entered and a list is output.
When A4/11" × 8
1
/
2
" paper is available, a report of this size is output. If not, specify the paper feed
location.
When output is complete, the screen for selecting an item is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item
No. is displayed.
U001 Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
(3) Contents of maintenance mode items (for 20 cpm copier)
To Next Page
Loading...
Need help?
General
