Vacon 100 flow Installation Manual

Table 43: The technical data of the VACON
®
100 INDUSTRIAL AC drive
Technical item or function Technical data
EMC (at default settings)
Immunity Fulfils EN61800-3, 1
st
and 2
nd
environment
Emissions 200-690 V: EN 61800-3 (2004), category C3, if the drive
is correctly installed.
The drive can be changed to C4 for IT type mains. See
chapter 8.5 Installation in an IT system. The IP00 / UL
Open Type drive has by default category C4.
Noise level
Average noise level (min-
max) sound pressure level
in dB(A)
The sound pressure depends on the cooling fan speed,
which is controlled in accordance with the drive tem-
perature.
MR8: 58-73
MR9: 54-75
MR10/MR12: 58-75
Safety standards IEC/EN 61800-5-1, UL 61800-5-1, CSA C22.2 No.274.
Approvals
CE, cULus, RCM, KC, EAC, UA. (See the nameplate of
the drive for more approvals.)
TECHNICAL DATA, VACON® 100 INDUSTRIAL VACON · 113
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
9

Vacon 100 flow Specifications

General

Protection class	IP20
Communication interface	RS-485
Operating temperature	-10°C to +50°C
Storage temperature	-40°C to +70°C
Ambient temperature	-10°C to +40°C
Control method	Sensorless vector control
Communication protocols	CANopen
Approvals	CE, UL
I/O	2 analog inputs
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature
Frequency range	0 Hz to 400 Hz
Humidity	5% to 95%, non-condensing
Voltage range	208-240 V