Vacon 100 flow - Flange Mounting of the IP00 Drive Module

5.2.2 FLANGE MOUNTING OF THE IP00 DRIVE MODULE
You can also install the IP00 drive module into the cabinet wall with a flange mounting
option.
NOTE!
The protection classes are different in different sections of the drive module.
A
B
D
A
C
E
Fig. 18: Example of flange mounting (enclosure size MR9)
A. The cabinet wall or other surface
B. The front
C. The rear
D. IP00 / UL Open Type
E. IP54 / UL Type 12
INSTALLATION INTO CABINET VACON · 39
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
5