TABLE OF CONTENTS
Preface
Document details 3
About this manual 3
About the product 3
1 Approvals 8
2 Safety 10
2.1 The safety symbols used in the manual 10
2.2 Warning 10
2.3 Caution 11
2.4 Grounding and earth fault protection 12
2.5 Using an RCD or an RCM device 13
3 Receiving the delivery 14
3.1 Package label 14
3.2 Type designation code 15
3.3 The contents of the delivery 15
3.4 Removing the packaging and lifting the AC drive 16
3.4.1 Weight of the AC drive 16
3.4.2 Lifting the IP00 drive module 16
3.5 "Product modified" label 19
3.6 Disposal 20
4 Mounting dimensions 21
4.1 Dimensions of MR8, IP00 21
4.2 Dimensions of MR9, IP00 22
4.3 Dimensions of MR10 and MR12, IP00 23
4.4 Dimensions for flange mounting of MR8 25
4.5 Dimensions for flange mounting of MR9 26
4.6 Dimensions for flange mounting of MR10 27
4.7 Dimensions of options for MR10 and MR12 28
5 Installation into cabinet 30
5.1 General information 30
5.1.1 General information about the installation, MR8-MR9 30
5.1.2 General information about the installation, MR10 31
5.1.3 General information about the installation, MR12 34
5.2 Mechanical installation 36
5.2.1 Installing the IP00 drive module into the cabinet 37
5.2.2 Flange mounting of the IP00 drive module 39
5.2.3 Installing a detached control unit 41
5.2.4 Cooling and free space around the AC drive 42
6 Power cabling 45
6.1 Cable dimensioning and selection 45
6.1.1 Cable and fuse sizes 45
6.1.2 Cable and fuse sizes, North America 52
6.2 Brake resistor cables 57
TABLE OF CONTENTS VACON · 5
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
To Next Page
Loading...
Need help?
General
