Automatic shifting between the speed ranges C and D is possible if you have
activated the C-D shifting automatics functionality in the tractor terminal
transmission settings. Automatic shifting between the speed ranges A and B or B
and C is not possible.
If the C-D shifting automatics is selected and either C or D range is selected in
the Auto1 mode, the automatics shift between the C and D range automatically,
depending on drive speed request, engine load and driving situation.
If the C-D shifting automatics is selected and either C or D range is selected in
the Auto2 mode, the automatics shift between the C and D range when the
engine speed increases above the shifting limit on the C5 gear or decreases
below the shifting limit on the D1 gear.
For example, if the driving speed is 32 km/h (D range) and Auto1 or Auto2 is
selected, the automatics shift the gear to C1 when the driving speed decreases to
0 km/h.
GUID-8827DB93-3F9A-42D2-B8D4-55A8DB96E7B3
1. Gear lever
3. Operation
- 108 -
To Next Page
Loading...
Need help?
General
