6. Move the navigation box to the steering angle calibration position
with
the arrow buttons.
• If the preconditions for calibrating the steering angle are not met, the
following screen is displayed:
RESET TO DEFAULT
SET
1
2
3
CAL
START
GUID-C654A050-7CFC-44A3-BF8C-A4D6DC2ADFE0
• If the preconditions for calibrating the steering angle are met, the
following screen is displayed:
START
RESET TO DEFAULT
SET
1
2
3
CAL
GUID-B90C21CD-EA5F-4707-9543-0B08A2E430C2
7. Turn the wheels to the middle position.
8. Start the calibrating procedure by pressing OK.
The angle value is displayed.
000
RESET TO DEFAULT
SET
1
2
3
CAL
GUID-0DAEB05A-0BB1-4BED-AFAA-40580144EB2E
9. Turn the steering wheel first to the left steering lock stop and the to the right
steering lock stop.
Make sure that the angle values behave smoothly.
10. End the calibrating procedure by pressing OK.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
Check the calibration
4. Maintenance
- 404 -
To Next Page
Loading...
Need help?
General
