GUID-096AC2CD-7899-47BA-BACB-CB5F7441456F
1. Light panel on/off button
2. Front working lights
3. Front waist working lights (optional)
4. Rotary beacon light (optional)
5. Rear working lights (optional)
6. Automatic operation of the rear working lights (optional)
7. Trailer hitch light (optional)
8. Rear waist working lights
9. Automatic operation of the rear waist working lights (optional)
1. Press the light panel on/off button to switch on the panel.
You can turn on the working lights only after you have switched on the light
panel. When the panel is switched on, the symbol on the on/off button is lit
green.
2. Turn the working lights on and off with the corresponding working light
buttons.
When a working light is turned on, the symbol on the working light button is lit
green. The light is lit green even if the actual working light is not installed.
3. Use the automatic rear working lights with the corresponding working light
buttons.
When the automatic operation is activated, the rear working lights are
switched on automatically when the power shuttle lever is in the reverse
position.
4. Press the light panel on/off button again to switch off the panel.
When the panel is turned off with the on/off button, the working light settings
are saved and taken into use when the panel is turned on again. The panel
can be turned off also by switching off the driving or the parking lights.
NOTE: The rotary beacon light (optional) can be turned on from the light
panel also when the panel or the driving or parking lights are switched off.
3. Operation
- 78 -
To Next Page
Loading...
Need help?
General
